Y strainer valve is an indispensable strainer valve device in the pipeline system of conveying medium. Y strainer valve is usually installed at the inlet of pressure reducing valve, pressure relief valve, constant water level valve or other equipment.
1. The air strainer valve makes the polluted air clean to the state needed for production and life, that is, to make the air reach a certain cleanliness.
2. The liquid strainer valve can clean the contaminated liquid to the state needed for production and life, that is, to make the liquid reach a certain cleanliness.
3. Network strainer valves are set up to block spam and make the information on the computer screen as compliant as possible. The same principle of absorption separates different colors of light
4. Light strainer valves to absorb unwanted light. The above should be a mesh strainer valve, in fact, there are many kinds of strainer valves, such as laminated strainer valve, sand strainer valve, carbon strainer valve and so on, the main principle is to use the strainer valve medium diameter interception than the medium diameter of small substances, of course, some strainer valve media also has adsorption and other special effects. Most strainer valve backwash is not so troublesome, as long as clean water from the end of the strainer valve water into the reverse backwash strainer valve medium can achieve a good backwash effect. This type of valve should be installed horizontally in the pipeline.
Post time: Aug-12-2021